Yamaha PianoCraft CRX-E320 Mode D'emploi page 32

FM/AM tuning
5
Press PTY SEEK START.
This unit starts searching for the corresponding Radio
Data System stations. This unit stops searching when
the selected program type is found. The program
name shows up on the front panel display.
News
y
To cancel PTY SEEK, press PTY SEEK START again.
28
En
To switch the information display of
Radio Data System
While receiving Radio Data System, press FREQ/
TEXT.
Each time you press the button, the information
display changes as follows:
PROGRAM SERVICE
PROGRAM TYPE
RADIO TEXT
CLOCK TIME
Information type
• PROGRAM SERVICE (PS)
Displays the station name.
• PROGRAM TYPE (PTY)
Displays the program type (genre).
• RADIO TEXT (RT)
Displays text information related to the Radio Data
System broadcast. (Shows an under bar for a non-
identifiable character.)
• CLOCK TIME (CT)
Displays the current time. (Shows the message
"CT WAIT" when time data cannot be received
properly.)
Notes
• The available Radio Data System information types vary
depending on the station.
• If the signal transmission of the Radio Data System station is
too weak, this unit may not be able to receive Radio Data
System information completely. In particular, RT (Radio Text)
information uses a lot of bandwidth, so it may be less available
compared to other types of information.