Typical Battery Recharge Time; Voice Module Operation - CHART CAIRE AirSep SeQual eQuinox 4000 Manuel D'utilisation

Typical Battery Recharge Time

It will normally take between 2 and 5 hours to recharge a fully
drained Battery back to 80% capacity, depending on the flow
setting being used. When the battery is fully charged, the battery
gauge will stop cascading. The battery can be charged in the unit
when the eQuinox is turned off and plugged in.
If the Battery becomes too warm during discharging, recharging
will not begin until the Battery sufficiently cools. Removing the
Battery may speed up the cooling process.
The Battery can recharge from both AC and DC power sources.
The Battery will also charge from the optional Desktop Charger.

Voice Module Operation

Voice Module Operational Instructions
The eQuinox can provide verbal notifications or alarms and
operating status. These verbal notifications supplement the
information on the light emitting diode (LED) display. The
following information provides instructions on how to turn the
voice module function on and off, adjust loudness, and change
language.
ON/Standby
Indicator
ON/Standby
(Green LED)
Key
No
Smoking
Icon &
Hidden Key
Flow Mode
Key
Flow Mode
Indicator
(Green LED)
Alarm Indicator
(Red LED)
Alert Indicator
Increase Flow
(Yellow LED)
(Green LED)
Decrease Flow
Rate Key
LCD
Display
enable/Disable the Voice Module
1. To enable/disable the voice module function, power on the
unit by pressing the ON/Standby Key.
2. After the unit has powered on, press the No Smoking Icon
and Hidden Key once.
3. Within 1–2 seconds, the SPKR = ON or SPKR = OFF menu
item will be present.
4. Press the Increase or Decrease Flow Rate Key to toggle the
selection to ON (enable voice module) or OFF (disable voice
module).
5. Within 3–5 seconds, the option selected will become active.
Note: This will only disable the voice module function once. When the
device is turned off and device is reset, the voice module function will
automatically be enabled.
Increase/Decrease the Volume of Vocal Notifications
1. To increase or decrease the volume of vocal notifications,
press the No Smoking Icon & Hidden Key twice.
2. The Volume = # - (Volume Setting Menu) will be present.
3. Press the Increase or Decrease Flow Rate Key to increase or
decrease the volume level from 1 to 10.
4. After selecting the desired loudness, the option will become
active/set within 3–5 seconds.
Changing Voice Module Language
1. To change the voice module language, press the No
Smoking Icon & Hidden Key five times to access the language
options.
2. The current activated language will be indicated on the
display. For example, if the voice module is speaking English
when accessing the language options menu, "English" will be
the text that appears on the display.
Rate Key
3. Press the Increase or Decrease Flow Rate Key to scroll
through the languages available.
4. Once the desired language is displayed, it will automatically
be set within 3–5 seconds.
External
Power
Present
Indicator
eQuinox (Model 4000) User Manual — 13