Installing The Weather Station On The Digital Picture Frame - Hama 00118569 Mode D'emploi

Installing the weather station on the digital picture frame

• Connect the indoor sensor to the appropriate socket
• Establishing a connection between the outdoor sensor and the main device.
Once you have inserted the batteries, the main device (the indoor sensor)
automatically receives data from the outdoor sensor about the outdoor
temperature. The battery compartment is on the back of the outdoor sensor.
Unscrew the screws to open the battery compartment.
Note
• After the batteries (2 x 1.5 V AAA; not included) have been inserted properly, the LED
flashes and the outdoor sensor is ready for use. Inserting the batteries with incorrect
polarity will result in damage to the product.
• Make sure you only use AAA alkaline batteries
on the back of the device.
8
GB
16