Using The Software - Textron GREENLEE DM-860 Manuel D'instructions

Using the Software

The DM-860 comes with an optically isolated RS-232 cable and software so that measure-
ments can be logged to a personal computer. Install the software using standard installation
procedures. Refer to the Read Me file on Disk 2 for instructions on using the software.
Connecting the Optical RS-232
1. Remove the cover of the optical port on the back of the meter.
2. Align the key of the connector with the key slot on the meter.
3. Twist the connector clockwise until it locks into place.
4. With the PC turned off, connect the cable to COM1 or COM2 of the PC.
Key Slot on back of meter
DM-860
17