Table des Matières
Publicité
Les langues disponibles
Les langues disponibles
English
Definitions
1
Loop Handle
For easy control of machine during
cutting work.
2
Carrying Ring
Connects the trimmer to the
harness.
3. Stop Switch
Switches the engine's ignition off
and stops the engine.
4
Throttle Trigger
Controls the speed of the engine.
5
Throttle Trigger Lockout
Must be depressed before the
throttle trigger can be activated.
6
Choke Lever
Eases engine starting by enriching
mixture.
7
Air Filter Cover
Covers and protects the air filter
element.
8
Fuel Tank
For fuel and oil mixture.
9
Fuel Filler Cap
For closing the fuel tank.
10 Carburetor Adjusting Screws
For tuning the carburetor.
11 Starter Grip
The grip of the pull starter, for
starting the engine.
12 Manual Fuel Pump
Provides additional fuel feed for a
cold start.
30
13 Cover
Covers and protects the spark plug.
14 Muffler with Spark Arresting Screen
Muffler reduces exhaust noises and
diverts exhaust gases away from
operator.
Spark arresting screen is designed
to reduce the risk of fire.
15 Machine Support
For resting machine on the ground.
16 Mowing Head
The cutting attachment, i. e.
mowing head, for different
purposes.
17 Deflector for Mowing Heads
The deflector is designed to reduce
the risk of injury from foreign objects
flung backwards toward the
operator by the cutting attachment
and from contact with the cutting
attachment.
18 Line Limiting Blade
Metal blade at the deflector which
keeps the line of the mowing head
at the proper length.
Specifications
EPA / CEPA
The Emission Compliance Period
referred to on the Emissions
Compliance Label indicates the number
of operating hours for which the engine
has been shown to meet Federal
emission requirements.
Category
A = 300 hours
B = 125 hours
C = 50 hours
Engine
Single cylinder four-stroke engine with
mixture lubrication
Displacement:
31.4 cc
Bore:
40 mm
Stroke:
25 mm
Engine power to
1.05 kW at
ISO 8893:
7,000 rpm
Idle speed:
2,800 rpm
Cut-off speed (rated): 9,500 rpm
Max. output shaft
speed (cutting
attachment):
7,150 rpm
Valve clearance
Inlet valve:
0.10 mm
Exhaust valve:
0.10 mm
Ignition System
Electronic magneto ignition
FS 111 RX
Publicité
Chapitres
Table des Matières
