Information On The Product - REMIS REMIfront IV-D Mode D'emploi

Masquer les pouces Voir aussi pour REMIfront IV-D:
Table des Matières

Publicité

Les langues disponibles
  • FR

Les langues disponibles

  • FRANÇAIS, page 8
Read this information carefully fi rst. This system is not suitable for vehicles
with air bags in the A-columns or above the doors or for vehicles with rain
US/GB
B. Information on the product
1. Manufacturer:
2. Description and type:
3. State of construction, date of
construction:
4. Field of application:
5. Fitting:
6. Description of function:
7. Design variations:
8. Warning:
C. Information on usage
Usage of front system
B1
6/20
Important Information!
sensors on the rear-view mirrors!
REMIS GmbH
Mathias-Brüggen-Str. 67-69
50829 Cologne
REMIfront IV-D - In-Cab Blind System Fiat Ducato
See sticker
Motor caravans based on the Fiat Ducato or vehicles of
iden tical construction with year of construction 2006 or
later (vehicles without airbag in the A-column or above the
doors)
See: Installation instructions
See B. (Information on usage)
Two-part vertical blind system for the front windscreen as
well as vertical blind system in window frames for side win-
dows. High level of coverage due to use of almost complete-
ly opaque plissé shade.
The shade may only been closed while the vehicle is stati-
onary and the motor is switched off. The system must be
com pletely folded together and locked prior to commencing
your journey. Warning: under exposure to intensive
le vels of solar heat, the handles may remain hot for
lon ger periods of time. The system is not intended for use
as a blind over longer periods of time (e.g. storage over
win ter). Depending on the temperature, the plissé material
may temporarily be more diffi cult to fold back.
B1+B2:
To release the front blinds, push both buttons in the direc-
tion of the arrow. Pull handle from the left and right to-
wards the middle of the windscreen. The handles will lock
automatically due to the magnetic catch. To open, pull the
handles apart in the direction of the arrows and pull them
back to their resting position. Lock the handle in place by
pushing it into the frame.
CAUTION!!!
Always ensure that both sides are
locked in place prior to commen-
cing travel!

Publicité

Table des Matières
loading

Table des Matières