Auto Defrost; When The Oven Is Working; Interrupting A Cooking Cycle; Altering Parameters - Zanussi ZKC38310 XK Mode D'emploi

5. Press the Start key. The oven will start to
operate

Auto Defrost

This function is used to automatically defrost,
meat, poultry, fish, vegetables and bread.
1. Rotate the Function Selector to the position
corresponding to the Microwave Function.
2. The Operating Time Indicator Light will light
in the display.
3. Press the "-" or "+" key to select the Auto
Defrost function which will flash.
4. Press the Start/Quick Start/Ok Key. The
display will show the type of food "F 01".
The following table shows the defrosting by weight function programmes, indicating weight
intervals, and defrosting and standing times (in order to ensure the food is of a uniform
temperature).
Programme
F 01
F 02
F 03
F 04
F 05
Important Note: please refer to the chapter "General instructions for defrosting "

When the oven is working...

Interrupting a cooking cycle

You can stop the cooking process at any time
by pressing the Stop key once or by opening
the oven door.
In both cases:
Microwave emission is stopped
immediately.
The grill is de-activated but is still very hot.
Danger of burning!
The timer stops automatically, indicating
the operating time that is left.
If you wish, at this time you can:
1. Turn or stir the food to ensure it will be
evenly cooked.
2. Change the process parameters.
To restart the process, close the door and press
the Start/Start/Quick Start/Ok Key.
8
Food Weight (g)
Meat 100 – 2000
Poultry 100 – 2500
Fish 100 – 2000
Fruit 100 – 500
Bread 100 – 800
5. Using the "-" and "+" keys, scroll through
"F 01" – "F 05" until the desired food type
is selected.
6. Press the Ok Key. The "g" symbol will flash.
7. By using the "-" and "+" keys enter the
frozen weight of the food in grams.
8. Press the Ok Key to validate.
9. Press the Start key. The oven will start to
operate.
10. Turn the food whenever the oven lets out a
beep and the display flashes the word
. Press the Start key to resume.
Time (min)
2 – 43
2 – 58
2 – 40
2 – 13
2 – 19

Altering parameters

The function and temperature can be altered
when the oven is operating or when the cooking
process has been interrupted by simply turning
the respective knob to the new setting.
To change power level and operating time,
please proceed as follows:
Press the "-" and "+" keys to change
directly the operating time.
Press the Start/Start/Quick Start/Ok Key to
enable power change. The Power Level
Indicator starts to flash.
Press the "-" and "+" keys to change the
power level.
Press the Start/Start/Quick Start/Ok Key.
Standing time (min)
20 – 30
20 – 30
20 – 30
10 – 20
10 – 20