Getting Started - Lovibond LC 100 Manuel De Demarrage Rapide

3. Getting Started

Charging the Battery
Connect the USB cable to the LC 100 and your computer's USB port. A battery
charging screen momentarily appears. For the first time connection, a
language selection screen also appears. Refer to the Initial Startup section on
the following page for first time operation.
Note: Some computers have low power USB ports which are typically located
at the front. It is recommended that the LC 100 is ONLY connected to high
power ports.
During charging, the instrument switches on and indicates charging with a
"lightning bolt" in the battery icon. The LC 100 will not power off while
plugged into the computer USB port. A full charge from empty will take 6
hours connected to a computer USB port.
Powering On and Off (battery operation only)
Turn the instrument on by pressing and releasing the Power button.
Power button
Lovibond® LC 100
4