Maintenance - Clarke FOCUS II AUTOSCRUBBER Disk 26 Manuel D'utilisation

MAINTENANCE

WARNING: Maintenance and repairs must be
done by authorized personnel
only.
WARNING: Always empty the solution tank
and recovery tank before doing
any maintenance.
WARNING: Keep all fasteners tight.
These Maintenance Procedures Must Be Done
Every Day
Keep the machine clean, it will need fewer repairs and
have longer life.
Do These Procedures When You Begin Your
Work Period
1. Turn off key switch.
2. Disconnect AC power from battery charger (fol-
low charger instructions).
3. Make sure the screen filter over the vacuum
motor is clean and in position (see figure 21.
4. Make sure the valve on the recovery drain hose
is clean. Tightly close the valve.
5. Make sure the brushes are in position and
installed correctly
6. Check the installation of the squeegee and
squeegee hose.
7. Make sure the solution drain/level indicator
hose is secure on upper fitting.
®
Clarke
Operator's Manual (EN) - FOCUS II MID-SIZE AUTOSCRUBBER
ENGLISH
Figure 21
®
EN
- 21 -