Table des Matières
Publicité
Les langues disponibles
Les langues disponibles
Equipment properties (continued)
Measurement sensor
Materials
Flow cell
Shackle
Environment considerations
Measuring medium temperature
Ambient temperature
Sensor distance - wall/ground
Miscellaneous
Cable length
Sensor side
Connection information
Controller side
Inspection interval
Maintenance requirements
Compliance
Warranty
English 4
Housing: stainless steel 1.4571 or titanium
Optic bracket: POM
Housing bolts: stainless steel 1.4571
Measurement window: synthetic quartz glass (Suprasil)
Gaskets (housing): Viton
Gaskets (measurement window): NBR (Nitrile Butadiene Rubber)
Housing: POM
Installation board: PVC
Gaskets: NBR (Nitrile Butadiene Rubber)
Fittings: nickel-plated brass
Stainless steel 1.4301
1 to 40 °C (34 to 104 °F)
–5 to +45 °C (23 to 113 °F)
Measurement sensor wetted by at least half from the measuring medium:
–25 to +55 °C (-13 to 131 °F)
Minimum 100 mm (3.94 in.) (recommended)
1.5 or 10 m, extension cable up to total maximum length of 40 m
8-pin, type of protection IP68, PUR
M12, type of protection IP67
Every 2 years
Clean the measurement window, if necessary. Intervals are dependent on the measuring medium.
CE
1 year
Publicité
Table des Matières
