Ventilation Position - Becker Centronic VarioControl VC320 Notice De Montage Et D'utilisation

Deleting the intermediate position
Open/close the shading solution to the intermediate position.
Press the STOP button and, within 3 seconds, also press the DOWN button
and hold the two buttons down.
▻ The sun protection shifts to confirm.
► The intermediate position is now deleted.
This function allows you to open the roller shutter from the
lower limit position up until the ventilation slots are opened.
Both limit positions must be set before the ventilation posi-
tion is set.
The curtain runs to the ventilation position from the lower
limit position.
Setting the ventilation position
Travel the shading solution from the lower limit position to the desired ventila-
tion position.
Press the STOP button and, within 3 seconds, also press the UP button and
hold the two buttons down.
▻ The sun protection shifts to confirm.
► The ventilation position is now saved.
3b) Checking the ventilation position
Press the UP button twice within one second.
► The shading solution runs to the ventilation position.

Ventilation position

25 - en