Maintenance; Dismantling; Storing; Disposal Of Equipment - TECNOMAGNETE MaxX 125 Manuel D'emploi Et D'entretien

USE AND MAINTENANCE MANUAL
USE AND MAINTENANCE MANUAL
6

MAINTENANCE

The MaxX permanent magnet hoister needs absolutely no particular maintenance pro ce dures by
the user.
If any mechanical or other damage should occur, Tecnomagnete will provide for repair of the hoister
on site while observing all the standards set forth in the guarantee in force if any.
Periodic check-ups
A) Check the mechanical conditions of the magnetic poles of the hoister (load contact
members). If they are damaged or very worn, immediately call Tecnomagnete before using
the hoister further
B) Check the name and data plates on the hoister for cleanliness and legibility. If they are
illegible call Tecnomagnete before continuing use of the hoister.
Tecnomagnete is absolutely not responsible for any malfunction or ac ci dent due to
repairs or modifi cations made to the hoister by the customer.
7

DISMANTLING

7.1

STORING

If the need arises to store the equipment for a certain amount of time observe the fol low ing in-
struc tions:
➔
Clean all components.
➔
Cover the equipment with a waterproof sheet.
➔
Place the equipment in an isolated area in order to avoid tripping on it and lift the hook of
the hoisting device at a height of more than 2.5m
➔
Keep the equipment in a dry environment.
7.2

DISPOSAL OF EQUIPMENT

If the need arises to dispose of the equipment, it is mandatory to observe a
few fundamental rules for the safeguarding of the en vi ron ment.
☞
Protective coverings, fl exible pipes, plastic or non-metal ma te ri al
should be dismantled and disposed of separately.
®
Page 36 of 146