Heating; Volume Settings - Hansgrohe RainBrain 15841 Série Mode D'emploi

Heating / warm-up
The warm-up function is available on the start screen (ill. 1). You can
use it to heat the water to the desired temperature before showering. All
configured showers are activated.
• Set the desired temperature before activating the showers.
• A prompt window appears after pressing the warm-up button (ill. 2).
• Confirm the function by pressing OK.
• A countdown of 5 seconds starts. Within these 5 seconds you can leave
the shower or cancel the warm-up.
• A wave animation runs until the desired temperature is reached.
• The display reads: Warm-up complete.
The warm-up can last for up to max. 90 seconds. The warm-up is cancelled
if the desired temperature is not reached within this period of time. The
display reads: Warm-up cancelled.
1
38,
Warm up
9
Volume
13:56

Warm-up
Caution!
All showers are briefly started
for warm-up. Please
leave the shower. Warm-up
starts in
5 seconds.
Back
Operating instructions
°C
°F
5
Menu
OK
English:
Volume setting
The Volume setting is not available in the US.

Level
Water volume
OK

Menu
9