Contrast Shower - Hansgrohe RainBrain 15841 Série Mode D'emploi

Contrast Shower

The Contrast Shower option allows the bather to shower with alternating
warm and cold water.
Switch on contrast shower:
• Press the menu button in the basic configuration (ill. 1).
• Select the contrast shower from the menu. The contrast shower is switched
on only if a shower is active (ill. 2).
An icon indicating that the contrast shower is active appears in the basic
•
configuration (ill. 3). You can switch off the contrast shower by pressing
this icon.
Configure contrast shower:
• Press the menu button in the basic configuration (ill. 1).
• In the menu press the wrench icon on the right next to the contrast shower
(ill. 2).
• The submenu for configuring the contrast shower appears (ill. 4). The speed
at which the temperature change occurs can be changed at 5 levels. 1
= slowest, 5 = fastest. The temperature of the contrast shower can be
lowered by 20°C / 36°F. The base level is that which is displayed in the
basic configuration.
In the basic configuration you can now see how the set temperature changes
in time with the contrast shower.
The contrast shower and cascade cannot be active at the same time. Head,
side, and hand showers can be selected and deselected while the contrast
shower is active. The maximum temperature of the contrast shower is 42°C
/ 108°F.
1
38,
Warm up
9
Volume
13:56
Operating instructions
°C °F
5
Menu
English:
Menu

Music
off
Contrast shower
off
Cascade
off
Settings
Back

101
Warm up
Back
 Contrast shower
Speed
Temperature reduction
Back
°F
OK
3
2°C
Start
11