Operating Controls - Sharp EL-2910R Mode D'emploi

OPERATING CONTROLS

ON POWER SWITCH; PRINT / ITEM
OFF P P IC
COUNT MODE SELECTOR:
"OFF": Power OFF
"•":
"P":
"P•IC": Power ON. Set to the print
Note:
Downloaded from:
Power ON. Set to the non-print
mode.
Power ON. Set to the print
mode.
mode.
Each time
pressed, in the case of
additional and subtraction, or
or is pressed, in the
case of memory calculations,
the associated item counter is
incremented by one. Select the
"P•IC" position to print the
counter values.
• The count is printed when
the calculated result is
obtained.
• Pressing of
clears the counter.
The counter has a maximum
http://www.usersmanualguide.com/
F 6 3 2 1 0 A
or is
GT RATE SET
,
3
capacity of 3 digits (up to
+999). If the count exceeds the
maximum, the counter will
recount from zero.
DECIMAL / ADD MODE SELEC-
TOR:
"F": Floating.
"6 3 2 1 0": Fixed.
"A": Add mode.
ROUNDING SELECTOR:
" ": An answer is rounded up.
"5/4": An answer is rounded off.
" ": An answer is rounded down.
GRAND TOTAL / RATE SETTING
MODE SELECTOR:
"GT": This selector will accumulate the
following: (" + " will be printed.)
• Addition and subtraction totals
obtained with
"•": Neutral, GT OFF.
"RATE SET": Set the key to position
to enter (or change) the
tax rate.
.