Paper Roll Replacement; Ink Roller Replacement - Sharp EL-2910R Mode D'emploi

Masquer les pouces Voir aussi pour EL-2910R:
Table des Matières

Publicité

PAPER ROLL REPLACEMENT

Never insert paper roll if torn. Doing so will cause
paper to jam. Always cut leading edge with
scissors first.
1) Insert the leading edge of the paper roll into the
opening. (Fig. 1)
2) Turn the power on and feed the paper by pressing
. (Fig. 2)
3) Lift the attached metal paper holder up and insert
the paper roll to the paper holder. (Fig. 3)
Downloaded from:
Fig. 1
Fig. 2
http://www.usersmanualguide.com/
DO NOT PULL PAPER BACKWARDS AS THIS
MAY CAUSE DAMAGE TO PRINTING
MECHANISM.

INK ROLLER REPLACEMENT

If printing is blurry even when the ink roller is in the
proper position, replace the roller.
Ink roller:
WARNING
APPLYING INK TO WORN INK ROLLER OR
USE OF UNAPPROVED INK ROLLER MAY
CAUSE SERIOUS DAMAGE TO PRINTER.
1) Set the power switch to OFF.
2) Remove the printer cover. (Fig. 1)
3) Remove the ink roller by turning it counterclockwise
and pulling it upward. (Fig. 2)
4) Install the correct color new ink roller and press it
in the correct position. Make sure that the ink roller
is securely in place. (Fig. 3)
5) Put back the printer cover.
Fig. 3
5
Type EA-781R-BK (Black)
Type EA-781R-RD (Red)

Publicité

Table des Matières
loading

Table des Matières