Important Safety Instructions; Installation Checklist - Electrolux EIED200QS Instructions D'installation

IMPORTANT SAFETY INSTRUCTIONS

WARNING
Please read all instructions before using this dryer.
Recognize safety symbols, words and labels
Safety items throughout this manual are labeled with a
WARNING or CAUTION based on the risk type as described
below:
Definitions
This is the safety alert symbol. It is used to alert you to
potential personal injury hazards. Obey all safety messages
that follow this symbol to avoid possible injury or death.
DANGER
DANGER indicates an imminently hazardous situation
which, if not avoided, will result in death or serious injury.
WARNING
WARNING indicates a potentially hazardous situation
which, if not avoided, could result in death or serious injury.
CAUTION
CAUTION indicates a potentially hazardous situation which,
if not avoided, may result in minor or moderate injury.
IMPORTANT
IMPORTANT indicates installation, operation or maintenance
information which is important but not hazard-related.
Tools and materials needed for installation:
OR
Optional uni- Adjustable
versal wrench pliers
available from
dealer
AND
3 or 4-wire
240 volt
cord kit

Installation Checklist

Unpacking
 Plastic film (lining drum interior) is removed and
discarded. See also image below.
Leveling
 Dryer is level, side-to-side and front-to-back
 Cabinet is setting solid on all corners
240v Electric Supply
 Approved NEMA 10-30R or 14-30R service cord with
all screws tight on terminal block
 Terminal access cover/strain relief installed before
initial operation
Door Reversal
 Follow detailed instructions in this guide
 Test hinge and latch for function
Electrical Power
 House power turned on
 Dryer plugged in
Final Checks
 Installation Instructions and Use and Care Guide
read thoroughly
 Door latches and drum tumbles when cycle starts
 Registration card sent in
AND
Phillips screwdriver
3
AND
Carpenter's level