Safety Information; Physical Characteristics; Mode Controls - Fluke Networks TS 30 Guide De L'utilisateur

Table des Matières

Publicité

Les langues disponibles

Les langues disponibles

TS30 Test Set
Users Guide

Safety Information

The following IEC symbols are used either on the test
set or in the manual:
W
Warning: Risk of personal injury. See the
manual for details.
Caution: Risk of damage or destruction to
equipment or software. See the manual
for details.
X
Warning: Risk of electric shock.
.
Earth ground
P
Conformité Européenne. Conforms to
relevant European Union directives.
)
CAN/CSA-C22.2 No. 60950-1-03
CAN/CSA-C22.2 No. 1010.1-92 + CSA-C22.2
No. 1010.1B-97, UL/ANSI 3111-1
~
Do not put products containing circuit
boards into the garbage. Dispose of
circuits boards in accordance with local
regulations.
WX
Do not use the test set if it is damaged.
Before you use the test set, inspect the case.
Look for cracks or missing plastic. Pay
particular attention to the insulation
surrounding the connectors.
If this product is used in a manner not
specified by the manufacturer, the
protection provided by the product may be
impaired.
2
Warning

Physical Characteristics

See Figure 1.
The TS30 housing is made of high-impact plastic. The
unit provides rugged service and withstands the rough
handling and shocks normally associated with field use.
The TS30 housing permits operation in bad weather,
such as in rain and dust storms.
The back of the handgrip has a contoured surface,
which lets you grip the test set between chin and
shoulder, leaving both hands free for other tasks.
The keypad has 16 keys that are recessed. The recessed
area protects the keypad and reduces accidental
pressing of the keys.
The belt clip includes a spring-loaded clip that ensures a
secure connection to belt loops and D-rings.
Figure 1. Physical Characteristics
The line cord is attached through a rubber strain relief.
See "Line Cord".
The electronic ringer is located near the belt clip on the
hand grip.

Mode Controls

See Figure 2.
The TALK/MONITOR switch is on the inside of the hand
grip near the transmitter. It puts the unit on-hook
(Monitor mode) or off-hook (Talk mode).
bfl01.eps

Publicité

Table des Matières
loading

Table des Matières