Installation And Connection - Bartscher 305.050 Mode D'emploi

WARNING! Hot external surface!
During operation some parts of the device become very hot. In order to avoid
injuries do not touch any hot parts!
•
Do not use the device if it does not function properly, has been damaged or dropped.
•
Do not use any accessory or spare parts that have not been recommended by the
manufacturer. These can be dangerous for the user, or lead to damage of the
device or personal injury, and furthermore invalidate the warranty.
•
Do not lay the cable over carpets or heat insulations. Do not cover the cable. Keep
the cable away from operating range and do not dunk it into water.
•
Do not move or tilt the device during operation.
WARNING! Hazard via electrical current!
The device may cause injuries due to improper installation!
Before installation, the local power grid specification should be compared with
that of the device (see type label). Connect the device only in case of compliance!
Take note of the security advice!

5.2 Installation and connection

CAUTION!
The installation and maintenance of the appliance should only be carried out by
trained personnel!
•
Discard the complete packing material after unpacking the device.
•
Remove the protective foil from the appliance. Ensure that it has been completely
removed.
•
Place the device on top of an even and safe surface which supports the weight of
the device and is not heat sensitive.
•
Not at any time should you place the device on an inflammable surface (such as:
table cloth, carpet, etc.).
•
You must not position the device near open fireplaces, electric ovens/arc furnaces,
furnaces/electric heaters or other heat sources.
•
The electrical circuit in the socket must be secured to at least 16A. Only connect the
device directly to the wall socket; do not use any extension cords or power strips.
•
Place the device so that the plug is easily accessible and can be quickly removed
from its socket in case of necessity.
- 23 -