Installation And Connection; Operating - Bartscher 103.067 Mode D'emploi

5.2 Installation and connection

•
Discard the complete packing material after unpacking the device.
•
Place the device on top of an even and safe surface which supports the weight of the
device and is not heat sensitive.
•
Not at any time should you place the device on an inflammable surface (such as:
table cloth, carpet, etc.).
•
You must not position the device near open fireplaces, electric ovens/arc furnaces,
furnaces/electric heaters or other heat sources.
•
Never install the device in a damp or wet environment.
•
The electrical circuit in the socket must be secured to at least 16A. Only connect the
device directly to the wall socket; do not use any extension cords or power strips.
•
Place the device so that the plug is easily accessible and can be quickly removed
from its socket in case of necessity.

5.3 Operating

•
Prior to first use, clean the housing of the device and the cup for the teaspoons with
a soft, damp cloth and a mild detergent. Dry everything thoroughly.
•
Prepare the proper coffee cups. Cups can be stacked one on top of the next, with
diameters of 75 mm to max. 90 mm. Up to 48 standard coffee cups can be stacked
with a diameter of 80 mm and height of 55 mm.
•
Prior to filling the device, the cups must be cleaned and dried. Place them upside
down in the intended compartments.
•
Attach the cups with the
opening to the designated
pins (dia. 1) and fill it with
teaspoons.
dia. 1
- 23 -