Bartscher 103.067 Mode D'emploi page 24

•
Connect the device to a suitable single
outlet.
•
Turn the unit on using the ON/OFF
switch, located on the right side next to
the cable at the base of the unit (dia. 2).
•
The cup warmer is heated automatically
(up to approx. 30-45° C). The cups are
kept warm as long as the device is in
operation.
NOTE!
Fill the compartments up to the top with cups to achieve an optimum degree of
warming for cups and spoons.
•
Remove cups and spoons as needed. The swivable base allows easy removal of
cups from the compartments.
WARNING! Hot surface!
Some parts of the device get very hot during operation. Be very careful when
touching these parts to prevent injuries.
Grip the cups on their handles when removing them.
•
Turn the device off prior to filling it with cups. When filling, make sure that the cups
are dry and clean!
WARNING! Danger of injury!
Never operate the device in case there are liquids on it or may have penetrated the
inside. To prevent injury through electricity or fire and damage to the device,
never touch it in this case. Separate it from the mains voltage immediately (pull
the power plug)!
•
Also separate the device from the power supply (pull the power plug!) if there are no
cups in it.
NOTE!
If the unit malfunctions, first check the safety fuse in the unit's base, at the left side
next to the cable (dia. 2).
If the fuse is damaged, it must be replaced.
If the unit continues to malfunction, contact a sales agent.
- 24 -
dia. 2