Cleaning And Maintenance; Safety Advice; Cleaning; Safety Instructions For Maintenance - Bartscher 103.067 Mode D'emploi

6. Cleaning and maintenance

6.1 Safety advice

o Before beginning with repair or cleaning works make sure the device has been
disconnected from power socket (pull the power plug!!!) and has cooled down.
o Do not use any acid agents and make sure no water ingresses the device.
o To protect yourself from electric shock, never immerse the device, its cables
and the plug in water or other liquids.
CAUTION!
The device is not suited for direct washing via water jets. Therefore, you must
not use any kind of pressure water jet for cleaning the device!

6.2 Cleaning

The device should be cleaned regularly.
o
Clean the housing of the device with a soft, damp cloth and a mild detergent.
o
Regularly clean the removable cups for the teaspoons with warm water and a mild
o
detergent.
Only use a soft cloth and make sure you never use any kind of abrasive agents or
o
pads which could scratch the surface.
After the cleaning procedure, you should use a soft and dry cloth to wipe dry and
o
polish the surface.

6.3 Safety instructions for maintenance

o Check the mains connection cable for damage from time to time. Never operate the
device when the cable is damaged. A damaged cable must immediately be replaced
by customer service or a qualified electrician to avoid dangers.
o In case of damage or malfunction, please contact your stockist or our customer
service centre.
o Only a qualified technician and using original spare parts and accessories should
carry out repairs and maintenance of the device. Do not attempt to repair the
device yourself.
- 25 -