Listening To Music - Panasonic RP-BTGS10 Manuel D'utilisation

Listening to music

If the Bluetooth
®
Bluetooth
on the headset.
• A2DP (Advanced Audio Distribution Profile):
Transmits audio to the headset.
• AVRCP (Audio/Video Remote Control Profile):
Allows remote control of the device using the headset.
1
Connect the Bluetooth
2
Select and play the music or video sound on the Bluetooth
device
• The selected music or sound is output to the speakers of the headset.
Operating time of batteries
Rechargeable battery (supplied)
Operating time may be less depending on the operating conditions.
■
Note
• There may be instances when you need to set the audio on the Bluetooth
device.
• Bluetooth
• When another Bluetooth
the volume will return to the average hearing level.
• If the connection is unstable, cancel the setting for transmitting sound in
high quality (including aptX
To switch the setting, turn off the headset first. Then press and hold the
LED pattern switch button, and turn on the headset again. One short beep
followed by a four-tone beep will sound, and the setting will be switched.
To return to the setting with high sound quality, perform the above
operation again. Two short beeps followed by a four-tone beep will sound,
and the setting will return to the default.
■
Attention
• The headset might leak sound depending on the volume level.
• When the volume is increased to near maximum level, music may sound
distorted. Decrease the volume until music sounds without distortion.
10
10
® compatible device supports the "A2DP" and "AVRCP"
profiles, music can be played back with remote control operations
Battery type
Alkaline dry cell battery
® devices that support aptX
®
device is connected or if the battery is removed,
®
device and the headset ( P. 8)
® can transmit higher quality audio.
® ), and prioritize the Bluetooth
Operating time
Approx. 5 hours
Approx. 4.5 hours
® connection.
®
®