Connecting The Power Cord (1) - Pioneer SPH-DA100 Manuel D'installation

Section
Connecting the system
02

Connecting the power cord (1)

Yellow
To terminal supplied with power
regardless of ignition switch position.
Red
To electric terminal controlled by
ignition switch (12 V DC) ON/OFF.
Orange/white
To lighting switch terminal.
Black (ground)
To vehicle (metal) body.
Note
When a subwoofer is connected to this
product instead of a rear speaker, change
the rear output setting in the initial setting.
(Refer to the Operation Manual.)
The subwoofer output of this product is
monaural.
Front speaker
Left
Rear speaker or
subwoofer (4 Ω)
When using a subwoofer of 70 W (2 Ω), be sure to connect with the violet and violet/black leads of this product.
Do not connect anything with the green and green/black leads.
8
En
White


White/black
Green


Green/black
Green
Not used.
Green/black
With a two-speaker system, do not connect anything
to the speaker leads that are not connected to
speakers.
Gray
Gray/black
Violet
Violet/black
Violet
Violet/black

Front speaker

Right

Rear speaker or
subwoofer (4 Ω)


Subwoofer (4 Ω) X 2
