FISCHER Komfort Mode D'emploi page 10

Assembly
GB
Step 1
Attaching the wheels
Step 2
Folding out the towbar
Step 3
Folding out the sides
Step 4
Connecting the sides
with the connecting rod
86388-FIS-IM-V03-INT-OEF.indd 10
Press in the securing pin on each axle support on the
underside of the base frame and at the same time
push the wheel axle all the way on. Ensure that the
securing pin has returned to its original position and
that the wheel is firmly fitted in place.
Release the securing clip on the attachment bolt, pull
the bolt out and fold the towbar forward. Then lock it
again by pushing the bolt through it and secure the
bolt by attaching the securing clip.
Fold the connecting rod out upwards and whilst doing
this pull the loop of the seat-back over it. Fit the
connecting rod in on the opposite side and attach it by
pushing through the bolt and then securing it by
attaching the securing clip.
Fold out each side upwards and attach each one at
the front and rear by pushing through the bolt and
then securing it by attaching the securing clip.
07.01.16 10:22