Description Of Controls - Hoover HF7 12 I Mode D'emploi

40000369.qxd 18/09/2003
When you are completely satisfied with your menu selection, you may exit the
menu and testing of the installation may now commence.
If, after the initial installation you may want to change any of the menu at a later
date, again run through the menu options from the beginning and change the
options you want to reset. This may be useful to change the "Set New Time" when
the clocks go forward or back.
Once set, the menu options will remain in the memory of the machine even if the
machine is unplugged or if a power cut occurs.
All of the buttons and dials on the washing machine control panel are listed below.
When you have selected the desired programme and any option buttons, the
information you have selected will appear on the screen in the Inter@ct display
panel.
When programmes and option buttons are compatible a beeping sound will be
heard and the light above the option button selected remains illuminated. If you
select an option button that is not compatible with the programme you require a
buzzing sound will be heard and the button light will not illuminate. To select an
option button press it once; to deselect an option button, press it again.
Carefully read the relevant descriptions detailed below:
Programme Selector Dial
Note: Do not press the Départ/Pause button before
selecting the programme. If this does happen, cancel the
programme (that you have set accidentally) by pressing the
Départ/Pause button for five seconds (See programme
cancelled description).
11:42 Page 15

DESCRIPTION OF CONTROLS

15