Cord Storage; Cleaning And Maintenance; Specifications - REBER 9718 N V-Home Manuel D'utilisation

EN
D. CORD STORAGE
Put the power cord into the storage area in the bottom of the machine
when not in use. Do not wrap the cord around the appliance in order to
avoid damages.
E. CLEANING AND MAINTENANCE
1. Always unplug the unit before cleaning.
2. Do not immerse in water or any other liquid.
3. Avoid using abrasive products or material to clean the unit, for they
will scratch the surface.
4. Use a mild dishwashing soap and a warm, damp cloth to wipe away
food residue or around components.
5. Dry thoroughly before using again.
N.B.: Gaskets can be removed for cleaning; just use water for
cleaning and dry carefully before reassembling, to avoid air leakage
during vacuum operation.
6. Store the device in a dry place, not
expsed to light, out of children's reach.
N.B.: When the device is not in use, DON'T LOCK THE COVER
WITH THE HANDLE, to avoid gaskets damaging.
F. SPECIFICATIONS
• 220-240V / 50Hz - 110W
• Suction capacity: 12 lt/min
• Vacuum level: -800 mbar max
• Seal: 2.5 mm x 30 cm.
• Dimensions : 402x180x h101 mm.
20