Parts And Functions; Control Panel - REBER 9718 N V-Home Manuel D'utilisation

EN
B. PARTS AND FUNCTIONS
6
10
1. Auto/Vac - Cancel :
This button has two functions depending on the machine status:
At stand-by condition, it starts the automatic operation of vacuuming
the bag and then automatically seals the bag when vacuum is comple-
te;At working (vacuuming or sealing operations) condition, it stops the
machine.
2. Seal:
Immediate start of welding operation.
3. Pulse:
Pulse vacuum function. Use this fuction to obtain customized vacuum,
in case of fragile products that could be crushed by automatic function.
When desired vacuum is reached, manual welding can be operated
with "2. Seal" switch.
BE CAREFUL: VACUUM LEVEL COULD BE LOWER THAN NE-
CESSARY TO GUARANTEE CORRECT FOOD PRESERVATION.
PRESERVATION TIME COULD BE LOWER THAN EXPECTED.
16
9
11
12

Control panel

Auto/Vac
Seal Pulse Canister
Cancel
1 2 3
10
4 5
8
7