Mounting Instructions - Dedicated Micros 2020/300 Manuel D'installation

4. Mounting instruction
Pan & Tilt (Type 2000)
Fig.2 Twin lamp mounting
Mounting configurations.
Fig. 2 & 3 show typical positions for I.R. Illuminators when mounted to a remotely controlled pan &
tilt head. Mount the Type 2020 Illuminator via the cradle (fig.4 item A) and secure using 2 off
M10x16 Hex. hd. machine screws (fig.4 item D), 2 off M10 spring washers (fig.4 item C) and 2 off
M10 plain washers (fig.4 item B) supplied with unit.
Note: Please ensure the lamp bulb filament is mounted horizontally to receive the required
life expectantcy and beam coverage. See bulb replacement (page 5)
Type 2020 Installation Manual
Type 2020 IR.Illuminator
Fig.3 Single lamp mount
Bulb filament is
factory set to comply
with this type of
mounting. See page 7
to re-orientate the
bulb if mounting in
other orientations
A
Fig.4 Mounting fixings
B
C
D
Page. 3