Status Bar; Sport Mode; Activity Recording - Medion LIFE P2200 Notice D'utilisation

7.5. Status bar

 Tap here to switch on the "Energy-saving" function.
When this function is enabled, the menu and all functions except the time
display on the fitness watch are disabled.
 Tap here to fully illuminate the fitness watch display in white, e.g. to see
better in the dark.
 Tap here to enable/disable "Do not disturb" mode on your fitness watch.
Switch this mode on to disable all notifications on your fitness watch.
 Tap here to enable/disable the "Telephone search" function.
When this function is enabled, the ring tone on your smartphone is played
so that you can locate it.

8. Sport mode

8.1. Activity recording

 Tap
to select a sport type to record your activity.
Use the MEDION® Fitness app to select an activity from an extended
range of sport modes (e.g. badminton, climbing, dancing etc.). The
range varies depending on the device model.
 Tap on the desired type of sport to start recording the activity.
Activity recording starts once the three-second countdown has elapsed.
 During the activity, press the on button (right button) to pause the activity.
The fitness watch vibrates and the display flashes.
 Press the on button again to resume the activity.
The fitness watch vibrates and recording continues.
 To end the activity recording, press and hold the on button for approx. 2
seconds.
The fitness watch vibrates and a prompt appears on the display to ask if you really
want to end the activity.
 Tap
to end the activity or tap
Once the activity has ended, an overview of the following data recorded is
displayed:
• Activity duration
• Distance travelled
• Calorie consumption
• Number of steps
• Average speed
• Average heart rate
50
to continue recording the activity.