Edirol UA-1X Mode D'emploi page 28

Connections and Driver Installation (Macintosh)
Connections and Driver Installation (OS X)
* The UA-1X and Mac OS 10.2 are used for this explanation.
■ Make Connections and System Sound
Input/Output Settings
1
Use a USB cable to connect the UA-1X to your
Macintosh.
2
Open the System Preference dialog box and click
Sound.
fig.macX-1
3
In the Sound Effects
tab, click Play alerts
and sound effects
through and choose
USB Audio CODEC
as the playback device
for sound effects.
figmacX-2, macOSX-3.
4
Click the Output tab,
and choose USB
Audio CODEC as the
device that will output
sound.
28
You cannot use the UA-1X in
the Mac OS X Classic
environment.
If no sound is output from the
speaker (internal speaker) of
the Macintosh, choose Built-in
audio controller in the Output
tab.