Edirol UA-1X Mode D'emploi page 18

Connections and Driver Installation (Windows)
fig.02-12.e
10
When installation of the USB
Human Interface Device
driver is finished, the
following dialog box will
appear. Click [Finish].
fig.02-13.e
11
Next, the USB Audio Device
will be detected automatically,
and the "Add New Hardware
Wizard" dialog box will
appear.
Click [Next], and proceed with the installation in the same
way as in steps 4–7 (pp. 16– 17).
fig.02-14.e
12
When installation of the USB
Audio Device driver is
complete, a dialog box like the
one shown here will appear.
Click [Finish].
This completes installation of the USB Composite Device
driver, the USB Human Interface Device driver, and the USB
Audio Device driver. Restart Windows.
Next, you need to make the driver settings.
→ Settings and Checking (p. 19)
18
In step 6, the screen will
indicate "Windows driver file
search for the device: USB
Audio Device."
Depending on your system,
the cursor may stay in the
hourglass shape for several
minutes after you click [OK],
but you should simply keep
waiting.