General Information; Technical Information - Zircon LASERVISION 6.0 Mode D'emploi

Niveau électronique
Table des Matières

Publicité

Les langues disponibles

Les langues disponibles

Figure 17: Turning the Backlight On

General information

The Zircon LaserVision is shock resistant, but it should be treated like a preci-
sion instrument. If the LaserVision is dropped it may need to be re-calibrated.
Refer to the section "Checking Your LaserVision for Proper Calibration" for
further instructions.
While the LaserVision is water resistant, it is not waterproof and should be
handled accordingly.

Technical Information

Size:
18.5 in. L x 1.2 in. W x 2.0 in. H (47.0 cm L x 2.8 cmW x 5.0 cm H)
Weight:
21.8 oz (618 g)
Battery:
Level: 3 AAA
Laser: 3 AAA
Battery Life: Level: 100 hours or 1 year with normal use
Laser: 15 hours of continuous operation
Accuracy:
LaserVision 7.0: ±1/4 in. at 100 ft. (±6.25 mm at 30 m)
LaserVision 6.0: ±3/8 in. at 100 ft. (±9.52 mm at 30 m)
Laser:
Type:
Wavelength:
Power:
LaserVision 6.0:
Typical Spot Size: 5/32 in. vertical height at 50 feet
Audio:
Loudness: 70 dB at 18 in. (46 cm)
Frequency: 880 Hz
Temperature: Operating: +20˚F to +120˚F (-7˚C to +49˚C)
Storage:
Humidity:
80% RH (non-condensing)
slope
On
-20°F to +150˚F (-29˚C to +66˚C)
Hold
2 Sec
Visiable Laser Diode
650 nm - Red (6.0) 650 nm - Red (7.0)
LaserVision 7.0: Class IIIa
(<5mW peak power)
Class II (<1mW peak power)
(4 mm vertical height at 15 meters)
15

Publicité

Table des Matières
loading

Produits Connexes pour Zircon LASERVISION 6.0

Ce manuel est également adapté pour:

Laservision 7.0

Table des Matières