Maintenance And Adjustment; Accessories - E+E Elektronik OMNIPORT 20 Manuel

Manual
RH/T HVAC probe
RH/T high temperature probe
RH/T miniature probe
PT100 cut-in probe
PT100 immersion probe
PT100 cut-in food probe
PT100 surface probe
air velocity probe
∅6mm
- 0...2m/s
(0.24") (0...400ft/min)
air velocity probe
∅6mm
- 0...20m/s
(0.47") (0...4000ft/min)
air velocity probe ∅12mm
(0.47")
oil probe - 1/2" ISO
oil probe - 1/2" NPT
page 48
8.

Maintenance and Adjustment

The PT100 inputs may only be recalibrated by skilled personnel or
preferable, by an accredited laboratory.
Clean the device as required using a damp cloth. Do not use
cleaning agents. Only use clean water to moisten the cloth.
9.

Accessories

stainless steel sintered filter (for ∅12mm RH/T probe) (HA010103)
(HA040201)
PTFE - filter (for ∅12mm RH/T probe
(HA040202)
metal grid filter (for ∅12mm RH/T probe)
(HA040203)
(HA040101)
carrying case big (basic device + 5 probes)
(HA040102)
carrying case small (basic device + 1 probe)
(HA040104)
(HA040105)
ball valve set 1/2" ISO for oil probe
ball valve set 1/2" NPT for oil probe
(HA040401)
probe cable 2m
probe cable 5m
(HA040402)
probe cable 10m
(HA040403)
(HA040204)
(HA040206)
OMNIPORT 20 english
(HA010105)
(HA010106)
(HA040902)
(HA040904)
(HA050101)
(HA050104)
(HA010813)
(HA010814)
(HA010815)