The Upper Menu - E+E Elektronik OMNIPORT 20 Manuel

Manual
HOLD
MAX
MIN
AVG
page 40
5.

The upper menu

The following functions can be selected in the upper menu:
HOLD MAX MIN AVG
Selection with , the selected function flashes and is entered
with . An entered function display is steady.
The menu can be interrupted with
wheel for 20 seconds.
HOLD: Hold "freezes" the measurement value.
MAX: MAX shows the maximum value in the active time period.
MIN: MIN shows the minimum value in the active time period.
AVG: AVG shows the arithmetical average value in the active time
period. The MAX value/MIN value/AVG memory is cleared by
switching the OMNIPORT 20 ON/OFF, by disconnecting and
reconnecting the sensor, or by briefly pressing
For sensors with one physical value (e.g.: PT100 - temperature),
the HOLD, MAX, MIN, AVG value is displayed in the 2nd
measurement field. For sensors with two physical values
(temperature/rel. humidity, temperature/velocity, etc.), the HOLD,
MAX, MIN, AVG value is displayed in the measurement field for that
sensor.
OMNIPORT 20 english
or by not pressing the thumb
in normal mode.