E+E Elektronik OMNIPORT 20 Manuel page 41

Manual
page 42
UNIT1:
UNIT1 enables the selection of different units for the first sensor
channel. The selected unit flashes and is activated using
Units can be selected using
ed if the connected sensor supports a minimum of 2 units.
UNIT2:
UNIT2 enables the selection of different units for the second sensor
channel. The selected unit flashes and is activated using
Units can be selected using
selected for SDI sensors, if the second channel supports a
minimum of 2 units.
Units that cannot be shown on the display are displayed with UNIT1/
UNIT2 using the arrow menus (g/kg, gr/lb, Pabs).
OMNIPORT 20 english
and . UNIT1 can only be select-
and . UNIT2 can
.
.
only be