Tool Identification; Technical Data; Main Components - FAR RAC 230 Traduction Des Instructions Originales

TOOL IDENTIFICATION

The riveting tool RAC 230 iis identified from a marking that
shows company name and address of manufacturer, designation
of the tool, CE.
Always refer to the information on the riveting tool when
requesting technical service.
Company name
and address
Serial number

MAIN COMPONENTS

A) ................................................................................. Nozzle
B) .......................................................... Tensile strenght lever
C) ................................................ Compressed air connection
D) .............................................................Head carring nozzle
14
designation of the tool
RAC 230
GB
D
A

TECHNICAL DATA

• Working pressure ......................................................6 BAR
• Min. int. diam. of the compressed air feeding hose
• Air consumption per cycle .........................................1,4 Nl
• Maximum force ...........................................6 BAR - 8709 N
• Weight .................................................................. 1,660 Kg
• Working temperature ...........................................-5°/+50°C
• Root mean square in total acceleration frequency (Ac)
to which the arms are subjected. ........................... 0,5 m/s
• A-weighted emission sound pressure level ............. 77 dBA
• Peak C-weighted instantaneous sound pressure <130 dBC
• A-weighted sound power ........................................ 94 dBA
AIR FEED
The air feed must be free from foreign bodies and humidity
in order to protect the tool from premature wear and tear of
the components in movement, therefore we suggest to use a
lubrificator group for compressed air.
Date 11-2015
B
RAC 230
C
8 mm
2
Revisione - 10