Loading The Roll Paper - Star TSP800 Série Mode D'emploi

Be sure to use roll paper that matches the printer's specification.
Cover open lever
Roll paper
Tension bar
(Standard Model)
Tension bar
Roll paper
(Wall Mount/Standard Model)

5. Loading the Roll Paper

Push the Cover open lever, and open
the printer cover.
While observing the direction of the
roll, set the paper roll into the hollow,
and pull on the leading edge of the
paper toward you.
Note 1: When you use a paper of the
thickness which needs the tension bar
(65 µ m paper thickness<100 µ m),
make sure not to pass the paper under
the tension bar.
Note 2: When you use a paper of the
thickness which doesn't need the ten-
sion bar (100 µ m paper thickness 150
µ m), please remove two screws at both
sides of the tension bar with a screw-
driver, and remove the tension bar unit
in advance. Ordinarily, this procedure
(removal of the tension bar) should
already have been done by your dealer.
– 17 –