Connecting Cables And Ac Adapter; Interface Cable - Star TSP800 Série Mode D'emploi

3. Connecting Cables and AC Adapter

3-1. Interface Cable

3-1-1. Ferrite Core Installation (Parallel interface model only)
Interface cable
Ferrite core
5 cm
maximum
Fastener
Pull and cut
– 8 –
(1) For only the parallel interface model,
affix the ferrite core onto the cable
as shown in the illustration below.
(2) Pass the fastener through the ferrite
core.
(3) Loop the fastener around the cable
and lock it. Use scissors to cut off
any excess.