Circle Cutter; Environment; Eu Declaration Of Conformity - Festool TRION PS 300 Q Notice D'utilisation D'origine

10.3

Circle cutter

The circle cutter (order no. 490118) can be used to
produce circular cuts with a diameter between 120
and 720 mm. The circle cutter can be fitted on both
sides of the base runner:

Slide clamping clip [8-1] onto the base runner
from the front,

insert circle cutter [8-4] through the clamping
clip from the side to the desired position,

tighten rotary knob [8-3],

insert circle tip [8-5] in the rear bore hole of the
circle cutter.
10.4 Festool CMS
By fitting the jigsaws in the Festool Systems CMS
you end up with a semi-stationary bench-mounted
saw for profile cuts. Further information can be
fond in the CMS brochure.
10.5 Saw blades, other accessories
In order to saw different materials quickly and
cleanly, Festool offers saw blades for all applica-
tions that are specially designed for your Festool
jigsaw.
11

Environment

Do not throw the power tool in your household
waste! Dispose of machines, accessories and pack-
aging at an environmentally responsible recycling
centre. Observe the valid national regulations.
EU only: European Directive 2002/96/EC stipulates
that used electric power tools must be collected
separately and disposed of at an environmentally
responsible recycling centre.
REACh:
www.festool.com/reach
12

EU Declaration of Conformity

Jigsaw
PS 300 Q
PSB 300 Q
PS 300 EQ
PSB 300 EQ
Year of CE mark: 2000
We declare under sole responsibility that this prod-
uct complies with the following directives and stan-
dards:
2006/42/EG, 2004/108/EG, 2011/65/EU, EN 60745-
1, EN 60745-2-11, EN 55014-1, EN 55014-2, EN
61000-3-2, EN 61000-3-3.
Festool Group GmbH & Co. KG
Wertstr. 20, D-73240 Wendlingen, Germany
Dr. Martin Zimmer
Head of Research, Development and Technical
Documentation
18.12.2012
TRION
GB
Serial no.
489580
489584
488639, 494353
489274, 491763
15