Selecting And Setting Video Mode; Setting Recording Pause Duration - Renkforce 1007598 Notice D'emploi

f) Selecting and Setting Video Mode
For operation of the surveillance camera, you can choose if photos or videos are saved when the motion
detector recognises any heat change in the surveillance area.
Note:
Settings are not possible while a recording is running.
• Briefly push the button „M" (9), the camera icon will flash at the upper left of the display.
• Briefly push the button „8" (10) twice until the video camera icon flashes in the display.
• Briefly push the button „5" (12) for confirmation.
• The symbol for the video resolution now flashes in the middle of the display.
High resolution (640 x 480 Pixel)
Low resolution (320 x 240 Pixel)
• Use the buttons „8" (10) or „2" (11) to select the desired resolution for the video recording.
• Briefly push the button „5" (12) for confirmation. The recording duration flashes in the display.
• Set the desired recording duration with the buttons „8" (10) and „2" (11). You can set a time from
10....60 seconds (5 second increments).
• Briefly push the button „5" (12) for confirmation.
• Briefly push the button „M" (9) to leave setting mode.
g) Setting Recording Pause Duration
The surveillance camera will wait for a certain time after a recording until it can be triggered again by the
motion detector, which will start a new recording. This is to prevent the memory from filling up unneces-
sarily fast.
Note:
Settings are not possible while a recording is running.
• Briefly push the button „M" (9), the camera icon will flash at the upper left of the display.
• Push the button „8" briefly 3x until „to xxx" flashes in the display (xxx represents a time from 001 to 600
seconds).
• Briefly push the button „5" (12) for confirmation.
• Use the buttons „8" (10) or „2" (11) to select the desired recording pause duration.
If you wish continuous recording, set the pause duration to „001".
• Briefly push the button „5" (12) for confirmation.
• Briefly push the button „M" (9) to leave setting mode.
39