Selecting And Setting Photo Mode - Renkforce 1007598 Notice D'emploi

e) Selecting and Setting Photo Mode
For operation of the surveillance camera, you can choose if photos or videos are saved when the motion
detector recognises any heat change in the surveillance area.
Note:
Settings are not possible while a recording is running.
• Briefly push the button „M" (9), the camera icon will flash at the upper left of the display.
• Briefly push the button „5" (12) for confirmation.
• Use the buttons „8" (10) or „2" (11) to set how many pictures are to be recorded when the motion
detector recognises a heat change in the surveillance area.
You can set 1 to 9 pictures.
Camera icon flashes: 1 picture
Camera icon with „2P" flashes: 2 pictures
A number (03....09) at the lower right of the display flashes: 3.....9 pictures
• Briefly push the button „5" (12) for confirmation.
• The symbol for the photo resolution now flashes in the middle of the display.
High resolution (12 megapixels, 4000 x 3000 pixels)
Normal resolution (1.3 megapixels, 1280 x 1024 pixels)
• Briefly press the button „5" (12) to start setting mode.
• Use the buttons „8" (10) or „2" (11) to select the desired resolution.
• Briefly push the button „5" (12) for confirmation.
• Briefly push the button „M" (9) to leave setting mode.
38