Medion Life P14325 Guide De Démarrage Rapide page 97

 To set the antenna type, select one of the following antenna types:
−
: Select this antenna type if you have a single receiver and a satellite antenna. Press
DIRECT
the OK button and then choose the desired satellite (you can also call up the transponder list
using the blue button). Afterwards, press the OK button again to start the search. After that,
decide whether or not the channel list should be loaded.
−
: Select this antenna type if you have multiple receivers and a single-cable system.
UNICABLE
Press the OK button and make all the necessary settings regarding
1/2, USER BAND
using the blue button). Afterwards, press the OK button again to start the search. After that,
decide whether or not the channel list should be loaded.
−
DISEQC SWITCH
DiSEqC switch. Press the OK button and activate the desired
can also call up the corresponding transponder list using the blue button). Afterwards, press
the OK button again to start the search. After that, decide whether or not the channel list
should be loaded.
 Afterwards, press
O K
After the end of the automatic channel storage, an overview of the number of found channels
appears for the corresponding reception types.
 Press the
O K
button to close the list and complete the search. The device now switches to the
channel of the previously selected preferred reception type. At the same time, the channel list is
displayed. If the list is not processed further, it closes after a few minutes.
 If the channel list does not close automatically, press the
The initial installation described here corresponds to the
INSTALLATION
14
and
BAND FREQUENCY
: Select this antenna type if you have multiple satellite antennas and a
to continue.
Scan statistics
Network Type
DVB-T
DVB-C
DVB-S
Analogue
Exit
OK
option in the
INSTALLATION
SATELLITE POSITION
(here you can also call up the transponder list
DISEQC
TV / Radio
51 / 0
0/0
966/158
29
M E N U
button to exit the function.
FIRST TIME
menu.
switch (here you
1 - 4