Installer La Base En Bois De La Baignoire - Kohler K-700 Guide D'installation Et D'entretien

Masquer les pouces Voir aussi pour K-700:
Table des Matières

Publicité

3.
Install the Wood Bath Base
Bath Base
Base de baignoire
Base de la bañera
Apply silicone sealant.
Appliquer du mastic à la silicone.
Aplique sellador de silicona.
Dowel
Goujon
Espiga
For Freestanding Installations
NOTE: A ceramic bath base is also available for this bath. See the instructions packed
with the ceramic bath base for this option.
NOTICE: Do not use the wood bath base to support the bath. The bath must be
supported by the bath feet only.
NOTICE: Ensure the rough plumbing and finished flooring are installed before
installing the bath base.
Attach the floor brackets to the bath base with the screws provided.
Apply two beads of silicone sealant to the bottom surface of the bath base.
Position the bath base in the desired location, and secure to the floor with the
screws provided.
With help, carefully lift the bath inside the bath base.
Position the bath so there is equal space between the bath skirt and the bath base.
Insert the dowels in the ends of the bath base.
Apply silicone sealant to the end rails, then press them completely onto the
dowels.
Immediately wipe away any excess sealant.

Installer la base en bois de la baignoire

Pour les installations autoportantes
REMARQUE: Une base de baignoire en céramique est aussi disponible pour cette
baignoire. Voir les instructions accompagnant la base en céramique pour cette option.
NOTICE: Ne pas utiliser la base en bois de la baignoire pour supporter cette
dernière. La baignoire doit être soutenue par les pieds uniquement.
1084188-2-B
Floor Bracket
Support du sol
Soporte para el piso
8
Screws
Vis
Tornillos
Kohler Co.

Publicité

Table des Matières
loading

Table des Matières