Rinse Aid Dispenser - Danby DDW631WDB Manuel Du Propriétaire

OPERATING INSTRUCTIONS

RINSE AID DISPENSER

Rinse aid can be used to prevent water droplets or
streaks from forming on dishes. The rinse aid will be
released automatically during the fi nal rinse.
The rinse aid dispenser is located inside the door,
next to the detergent dispenser. To fi ll the rinse aid
dispenser, open the cap and pour rinse aid into the
dispenser until the level indicator on the right turns
black. Be careful not to overfull the dispenser. The
total volume of the rinse aid dispenser is 110 ml.
Do not put any other substance in the rinse aid
dispenser as this can damage the appliance.
As the rinse aid diminishes, the size of the black
dot on the rinse aid level indicator will change.
Once the black dot has become clear, the rinse aid
dispenser should be refi lled.
The rinse aid dispenser has four settings. The
recommended setting is "3".
If dishes are not drying properly or if water spots
are forming, turn the setting to "4".
If there is a sticky residue on dishes after washing,
turn the setting to "1" or "2".
Detergent Dispenser
Adjust the amount of rinse aid that will
be dispensed by changing the setting on
the knob inside the dispenser.
8
Rinse Aid Dispenser
Twist cap to the
left and pull out
to remove.
Make sure to
replace the cap
after fi lling.
Rinse Aid Indicator
Full
3/4 full
1/2 full
1/4 full
Empty