Télécharger Imprimer la page

Olymp LavaSit DINER Mode D'emploi page 7

Masquer les pouces Voir aussi pour LavaSit DINER:

Publicité

Les langues disponibles
  • FR

Les langues disponibles

  • FRANÇAIS, page 12
2. Comfort chair
Seat with vibro-massage function
The seat has vibration motors in the shoulder zone.
You can use the multi-button remote-control unit (Fig. 3) to control the vibro-massage
functions as follows:
0
If lamp is lit green, your unit is connected to power supply and is ready for use.
1
Massage motors in shoulder zone ON/OFF
2
Lamp lights up when massage motors in shoulder zone are operating.
3
Button to adjust massage intensity.
4
Button to adjust massage rhythm.
5
Button to select a massage program.
The "Flat" program is selected by default when button (1) is pressed.
Program 1: "Flat" – The massage motors operate simultaneously at the lowest
intensity and speed level.
Program 2: Pressing button (5) starts the "Tap" program
– the massage motors operate rhythmically (on / off).
Program 3: Pressing button (5) a second time starts the "Wave" program
– the massage motors operate in a wave-like cycle with increasing and decreasing intensity.
A
Lamp lights up green when button (5) is pressed. It goes out when the highest or
lowest level is reached.
B
Lamp lights up when the "Flat" program is activated.
C
Lamp lights up when the "Tap" program is activated.
D
Lamp lights up when the "Wave" program is activated.
E
"Stop" button switches off all massage functions.
• The massage function switches off automatically after twenty minutes. It can be started again
immediately using button (1).
• The remote-control unit is secured magnetically to the right-hand side of the seat. (Fig. 4)
Important user information regarding the remote control unit :
The remote control of the shampoo unit is designed exclusively for the use of clients with
dry hands.
To guarantee correct operation of the electronic components, the remote control unit
must in no circumstances be allowed to come into contact with water, shampoo or other
fluids.
If it is operated with hands covered in foam, or with dirty hands, the remote control unit will not
operate correctly, there will be lasting damage to the electrical components, and the keys may become
permanently soiled.
The guarantee does not cover damage to the electronics as a result of the effects of
wetness!
If, in exceptional circumstances, stylists need to operate the remote control themselves, it is essential
that the plastic cover be used.
GB
2

Publicité

loading