QEO FL 510HV-G TRACKING Mode D'emploi page 58

EN
Alignment
58
After set up of the FL 510HV-G Tracking and
receiver FR 77-MM Tracking switch on both
the laser and the receiver.
After the self-levelling process of the laser is
completed press button
The tracking function is activated and the
blue LED at the receiver is blinking.
After reaching "on-grade" the blue LED at the
receiver stops blinking and the green LED
lights permanently.
This indicates that the tracking process is
completed.
The receiver FR 77-MM returns into normal
reception mode.
for 2 sec.