Set Up The Laser - QEO FL 510HV-G TRACKING Mode D'emploi

EN
E

SET UP THE LASER

Set up the instrument on the floor direct or mount it onto a tripod (if necessary use the horizontal fine
adjustment bracket).
For vertical use fix the instrument on the vertical mount or first fix it on the vertical mount and then onto
a tripod.
Set up the instrument as upright as possible to allow the self-levelling system to function within the
range.
Set up on the floor
Use with a tripod
=> =>
Set up the unit on the vertical mount and start the operation immediately or use it with the mount
on a tripod.
37