QEO FL 510HV-G TRACKING Mode D'emploi page 43

EN
VERTICAL APPLICATION
During the vertical application all functions are the same as in the horizontal mode.
Exception: slope setting
When the instrument is in the self-levelling mode the Z axis is self-levelling.
USE OF THE TELESCOPIC VIEWFINDER
Aim the X-axis of the laser exactly in the direction of the axis which has to be tilted with the help of the
notch and bead on the top cover. At larger distances please use the telescopic viewer which can be
mounted on top of the instruments housing.
Look into the viewer from this side with a distance of about 10 – 15 cm!
Please note: The telescopic viewer is used to align the slope axis to the target.
43