Functional Description - Makita DUB363 Manuel D'instruction

Installing or removing elbow pipe and dust bag
Optional accessory
1. Insert the elbow pipe into the dust bag and tighten
the belt to fix the elbow pipe as shown in the figure.
1
► 1. Dust bag 2. Elbow pipe 3. Belt
2. Attach the elbow pipe to the main unit.
Insert the elbow pipe into the main unit with the bolt facing
left as shown in the figure. Turn the elbow pipe as shown in
the figure so that the bolt is aligned with the hole on the main
unit, and then tighten the bolt firmly using the hex wrench.
1
► 1. Bolt 2. Elbow pipe
2
3
1
2
8 ENGLISH
3. Attach the hook of the dust bag to the shoulder
strap, and then attach the hooks of the shoulder strap to
the main unit as shown in the figure.
1
► 1. Hook
To remove the dust bag and elbow pipe, perform the
installation procedure in reverse.

FUNCTIONAL DESCRIPTION

CAUTION:
Always be sure that the machine is
switched off and the battery cartridge is removed
before adjusting or checking function on the
machine.
Installing or removing battery
cartridge
CAUTION:
Always switch off the machine
before installing or removing of the battery
cartridge.
CAUTION:
Hold the machine and the battery
cartridge firmly when installing or removing bat-
tery cartridge. Failure to hold the machine and the
battery cartridge firmly may cause them to slip off
your hands and result in damage to the machine and
battery cartridge and a personal injury.
CAUTION:
Always install the battery cartridge
fully until the red indicator cannot be seen. If not,
it may accidentally fall out of the machine, causing
injury to you or someone around you.
CAUTION:
Do not install the battery cartridge
forcibly. If the cartridge does not slide in easily, it is
not being inserted correctly.
1